Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Four Corners, TX
Gate access control in Four Corners means keypads, remotes, phone entry, card readers, and video intercoms wired into automatic driveway gates on properties that run the gamut from 1970s ranch acreage to brand-new HOA subdivisions. The clay soil here shifts, the humidity corrodes, and the mix of legacy agricultural gates alongside modern ornamental iron means a control system has to be configured for whatever the gate actually is. Call (346) 295-3437 and you’ll get a live person, a written price before work starts, and a technician who documents every setting he touches.
Why Four Corners Homes Are Different
Four Corners sits unincorporated in Fort Bend County, caught between what it was and what it’s becoming. On one street you’ll find a 1980s pipe-post swing gate held by a chain and padlock, on the next a builder-installed ornamental iron gate with a keypad, photo-eyes, and an HOA that wants it working a certain way. The soil underneath all of it is Fort Bend’s shrink-swell Vertisol clay. It absorbs water in the spring, swells, then cracks and drops in a dry summer. Posts lean, gates bind, and a control system that was perfectly aligned in March stops talking to the limits by August. Technicians working Four Corners carry both legacy agricultural gate hardware and current operator components, because both worlds sit on the same street.
Then there’s the water. Hurricane Harvey put much of Fort Bend County underwater in 2017, and Four Corners parcels that sit in AE or X-shaded flood zones saw operators and underground wiring submerged for days. Motors corrode from the inside out after that, control boards short, and the fix usually means elevated mounting and sealed connections, not just a part swap. There is no Four Corners city permit requirement for gate work, but Fort Bend County does enforce elevation and electrical placement rules in designated floodplains. A contractor who skips the FEMA map check discovers the problem on the next inspection.
Our Main Four Corners Services
These are the three calls we get most from Four Corners homeowners. Each has its own page with pricing, sub-jobs, and local detail for this specific area.
Gate Repair in Four Corners
Broken hinges, sagging leaves, gates that drag, gates that won’t latch. In Four Corners the usual causes are the clay shifting a post or years of rust on a legacy farm gate. We repair what’s actually broken rather than replacing what isn’t, and every repair carries our 365-Day Done Right Promise. Full detail is on the Gate Repair in Four Corners page.
Gate Installation in Four Corners
New subdivision gates need to meet HOA specs for material, height, and automation. Older acreage properties often need something simpler: a solid swing gate that handles the long run between posts without sagging. We quote a complete installation in writing, including the operator, the safety edges, and the power run. See Gate Installation in Four Corners for details and pricing.
Gate Motor & Opener in Four Corners
There are nine major automation brands on our service list, and Four Corners properties have all of them. BFT, Linear, Viking, Ghost Controls, plus the rest. We carry parts for the common failures and can pull the specific board or arm for the uncommon ones. Gate Motor & Opener in Four Corners breaks down replacement and repair by brand and symptom.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Four Corners
Gate access control in Four Corners means the electronics that decide who gets in: keypads, remotes, phone entry, card readers, and video intercoms. On a 2000s HOA subdivision home, that’s usually a builder-installed keypad wired into an operator. On an older acreage property, it’s often a retrofit: a homeowner adding a phone entry system or a keypad to a gate that was manual for thirty years. Four Corners humidity accelerates corrosion in control boards and keypad contacts, and the same clay that throws a gate out of plumb also pulls underground sensor wiring. As we detail on our Gate Access Control hub, every job here starts with the question of what the gate will actually tolerate, not what the brochure says.
Keypad Entry
Signs you need it
The keypad works intermittently after rain, or some buttons have stopped responding entirely.
What it costs in Four Corners
Keypad replacement in Four Corners typically runs $180 to $340 depending on whether we’re replacing a wired keypad or adding a wireless model.
How we do it
We test voltage at the keypad, pull the old unit, wire the new one, program the codes, and photograph the final settings.
Phone Entry
Signs you need it
Visitors press the call button and nothing rings, or the gate won’t open from the phone receiver.
What it costs in Four Corners
Phone entry installation or repair in Four Corners runs $450 to $850 depending on whether cellular or landline integration is required.
How we do it
We mount the unit, wire it to the operator’s open input, configure the call routing, and test both incoming and outgoing calls before we leave.
What Gate Access Control Costs in Four Corners
| Item | Typical range in Four Corners |
|---|---|
| Keypad entry | $180 - $340 |
| Remote control | $120 - $250 |
| Phone entry | $450 - $850 |
Can you program my existing keypad instead of replacing it?
Yes, when the keypad itself is functional. We’ll re-flash the codes, verify the relay output, and photograph the programmed settings. If the keypad has internal corrosion from Four Corners humidity, replacement is usually the cheaper path. Call (346) 295-3437 for an exact quote.
Do you handle the wiring between the keypad and the motor?
We do. That includes buried wire runs, conduit, and connections that have to stand up to Fort Bend County water exposure. Every run is tested before we close up the trench. Call (346) 295-3437 and we’ll scope it in writing.
Gate Parts & Welding in Four Corners
Gate parts and welding in Four Corners is where the older housing stock shows up. A 1980s pipe gate with a rusted hinge barrel, a sagging leaf that needs the top rail cut and re-welded, a post that the clay has turned five degrees out of plumb. Newer subdivision gates need parts too: hinge brackets, rollers for sliding gates, and the occasional cracked ornamental iron picket. The work is exact: we identify the part, quote it in writing, and photograph what we installed. That documentation habit is the backbone of our Gate Parts & Welding service.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground on one side, and the hinge barrel has visible rust or play.
What it costs in Four Corners
Hinge replacement in Four Corners runs $180 to $400 per leaf depending on gate weight and whether the post needs reinforcement.
How we do it
We support the gate, cut the old hinge free, weld or bolt the new one, and photograph the alignment.
Post Replacement
Signs you need it
The post leans, the gate won’t close square, or the post base shows rust-through and cracking.
What it costs in Four Corners
Post replacement in Four Corners runs $350 to $850 depending on depth and whether we’re setting into clay or concrete.
How we do it
We dig out the old footing, set the new post plumb, pour, brace, and return after cure to re-hang the gate.
What Gate Parts & Welding Costs in Four Corners
| Item | Typical range in Four Corners |
|---|---|
| Hinge replacement | $180 - $400 |
| Post replacement | $350 - $850 |
| Custom welding | $150 - $500 |
Can you weld a broken ornamental iron picket back to match the rest?
Yes. We match the steel thickness, cut to size, weld, grind the joint clean, and hit it with matching finish. The repair won’t look like a patch. Call (346) 295-3437 for a written price.
Do you repair sliding gate rollers or just replace them?
Both. A roller with bearing play gets replaced; a roller that’s simply gummed with clay and rust gets cleaned and re-greased. We’ll tell you which one is actually needed. Call (346) 295-3437.
Brands We Service in Four Corners
We work on BFT, Linear, Viking, and Ghost Controls equipment, plus the rest of the nine major automation brands on our service list. Common boards, arms, and remotes are stocked for same-day jobs across Four Corners, and we source the uncommon parts within one to two business days. See our brands for the full list.
Pricing for Gate Repair in Four Corners, TX
| Service | Typical range in Four Corners |
|---|---|
| Keypad entry | $180 - $340 |
| Remote control | $120 - $250 |
| Phone entry | $450 - $850 |
| Card reader | $320 - $650 |
| Video intercom | $500 - $950 |
| Hinge replacement | $180 - $400 |
| Post replacement | $350 - $850 |
| Rail repair | $200 - $450 |
| Custom welding | $150 - $500 |
| Gate rollers | $140 - $320 |
What pushes a Four Corners price toward the top of a range: a post set deep in gumbo clay that needs a wider footing, a control board that’s been underwater, or a gate that’s been out of square long enough to warp the leaf. What doesn’t push price up is surprise. The written price you approve before work starts is the price you pay.
Neighborhoods We Serve in Four Corners
We run calls across the full Four Corners area, from the older acreage parcels near the Fort Bend county line to the newer platted subdivisions. Our Houston office dispatches local crews, so response is typically same-day or next-day for repair work across Four Corners.
- Pheasant Creek
- Four Corners central acreage
- Regal Estates
- Plantation settlement area
- Newer subdivisions along FM 1092
Service Area - Cities Near Four Corners
The same crew and the same written-price standard cover the surrounding Fort Bend communities. If your gate is just over the line, we can still get to it. We regularly work in Sugar Land, TX, New Territory, TX, Greatwood, TX, and Stafford, TX.
Serving Four Corners, TX - Our Local Coverage Area
We’re based in the Four Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Four Corners
For repair calls in Four Corners, we’re typically on-site the same day or the next morning. Dispatch is coordinated from our Houston office, but the crews are local to Fort Bend County. Call (346) 295-3437 and you’ll talk to a live person, not a voicemail tree.
There is no city building permit requirement because Four Corners is unincorporated. Fort Bend County does enforce elevation and electrical placement rules for properties inside FEMA-designated floodplains, so we check the map before quoting any operator or wiring work.
Yes. Many Four Corners subdivisions have HOA specs for gate material, height, and automation brand. We ask for the spec sheet up front, match it in the written quote, and photograph the finished work for your HOA file if needed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Four Corners Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.