Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pearland, TX
Gate access control failures in Pearland rarely start with the keypad. They start with the Beaumont clay under the post, shifting a gate an inch out of alignment and pulling the lock, the sensor wiring, and the operator’s limit settings out of spec with it. Most Pearland homes were built after 2000 in master-planned communities like Shadow Creek Ranch and Silverlake, which means thousands of automatic driveway gates are hitting their first big structural and electronic repair cycle at the same time. We fix the control problem and its root cause in one visit, with a written price before we start. Call (346) 295-3437.
Why Pearland Homes Are Different
Pearland sits on some of the most expansively reactive soil in the country. Beaumont clay swells through every wet season and shrinks in drought, which heaves gate posts set in concrete until the gate racks out of plumb. A gate that “hits the stop wrong” here is rarely a simple adjustment issue: it usually traces back to a post that has migrated an inch or more, and no limit-switch tweak holds until the footing is re-set.
On top of that, the Gulf Coast humidity and salt-laden air accelerate oxidation on ornamental iron year-round. Hurricane Harvey flooded entire subdivisions in 2017, submerging gate motors, control boards, and keypads. Many of those units were dried out but never fully replaced, so Pearland techs still see a steady cycle of corrosion-related operator failures tied back to flood damage. Most work also happens in HOA-governed subdivisions where architectural guidelines govern finish, color, and hardware style, so repairs often need committee approval before anything gets installed.
Our Main Pearland Services
The two services Pearland homeowners call about most are access control repairs and parts or welding work, but these three pages cover the full scope of what we do across the city.
Gate Repair in Pearland
Mechanical gate repair in Pearland almost always involves checking the post alignment before touching the hinges or the operator. A sagging gate leaf on a 2000s-era ornamental iron driveway gate is usually a sign the post has shifted in the clay, not just that the hinge pins wore out. We re-plumb the post, replace worn hardware, and document every adjustment. Full details are on our Gate Repair in Pearland page.
Gate Installation in Pearland
New gate installation here has to account for Beaumont clay movement from day one. We set posts deeper than the standard minimum, with concrete mixes designed for expansive soil, and we check HOA finish requirements before ordering any panel or hardware. Whether you are replacing a driveway gate or adding a pedestrian gate, the written scope covers the whole job. Full details are on our Gate Installation in Pearland page.
Gate Motor & Opener in Pearland
Motor and opener failures in Pearland often trace back to two local culprits: flood-damaged control boards from Harvey that were never replaced, and limit switches that drift because the gate itself keeps moving with the soil. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we repair before recommending replacement. Full details are on our Gate Motor & Opener in Pearland page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Pearland
Gate access control in Pearland means keypads, phone entry units, card readers, and video intercoms that have to survive Gulf Coast humidity, clay-driven gate movement, and the occasional flood. The most common failure we see is a perfectly good keypad or reader that stops working because the gate shifted a half inch and pulled the lock wiring loose or knocked the photo-eye out of alignment. We service whatever is already mounted, including Gate Access Control hardware from Linear, DoorKing, and Viking, and we repair before recommending a replacement.
Keypad Entry
Signs you need it
The keypad works intermittently, ignores certain codes, or only responds after several presses.
What it costs in Pearland
Keypad replacement or repair in Pearland typically runs $185-$425 depending on the type and where it’s mounted.
How we do it
We test the keypad output at the control board, replace or re-wire the unit, and leave a photo log of the new wiring and a record of the part number installed.
Remote Control
Signs you need it
The remote only works within a few feet of the gate, or one remote stops opening while another still works.
What it costs in Pearland
Remote programming or replacement in Pearland typically runs $95-$220 per remote, including reprogramming the receiver.
How we do it
We check the receiver frequency, clear the old code, program the new remote, and document the receiver model and code set so future repairs don’t require a service call.
What Gate Access Control Costs in Pearland
| Item | Typical range in Pearland |
|---|---|
| Keypad entry repair or replacement | $185-$425 |
| Remote programming or replacement | $95-$220 per remote |
| Phone entry or card reader repair | $225-$600 |
Can you fix a flood-damaged keypad on an HOA entry gate in Pearland?
Yes. Harvey-damaged keypads and control boards are a frequent call here. We replace the control board, the keypad, or both, and we document the work so the HOA has a record for future maintenance. Call (346) 295-3437 for a written estimate.
Why does my keypad work but the gate won’t open?
Usually the keypad is fine and the problem is a lock or operator fault triggered by gate movement. We test the keypad output at the board before recommending any parts. Call (346) 295-3437 to schedule a service visit.
Gate Parts & Welding in Pearland
Gate parts and welding in Pearland usually means replacing hinges and bearings that have worn out faster than normal because the gate has been fighting a tilted post for years. Steel and wrought iron rust faster here than in drier parts of Texas, and flood-damaged components keep failing long after the water receded. Our Gate Parts & Welding work covers hinge replacement, post re-setting, rail repair, and custom welding, and everything gets a written price before the grinder comes out.
Hinge Replacement
Signs you need it
The gate sags noticeably, scrapes the ground on one side, or the hinges squeal even with fresh lubrication.
What it costs in Pearland
Hinge replacement or bearing work in Pearland typically runs $185-$425 per hinge depending on gate weight.
How we do it
We lift the leaf, cut out the old hinge or worn bearing, weld in the new hardware, and photograph the finished weld before covering it.
Post Replacement
Signs you need it
The post leans visibly, the gate gap is wider at the top than the bottom, or the gate no longer latches.
What it costs in Pearland
Post re-setting or replacement in Pearland typically runs $425-$1,200 depending on depth, concrete, and whether the post can be salvaged.
How we do it
We excavate the old footing, set the post deeper with a mix suited to Beaumont clay, and document the depth and concrete pour in the job record.
What Gate Parts & Welding Costs in Pearland
| Item | Typical range in Pearland |
|---|---|
| Hinge replacement | $185-$425 per hinge |
| Post re-setting or replacement | $425-$1,200 |
| Rail repair or re-welding | $150-$600 |
Does HOA approval slow down gate welding work in Pearland?
It can. Many subdivision guidelines require matching finish, color, and hardware style before welding or replacement parts go in. We provide a written scope and photos to submit for approval. Call (346) 295-3437 if you need a written estimate for your HOA board.
Can you re-weld a broken gate leaf instead of replacing the whole gate?
Usually yes, as long as the metal is structurally sound around the break. We grind out the crack, weld it, and document the repair. Call (346) 295-3437 and we’ll tell you honestly whether welding is worth it.
Brands We Service in Pearland
We carry parts for Linear, DoorKing, and Viking systems on our local trucks, along with common hinges, photo-eyes, and control boards. Most access control and motor repairs are same-day or next-day once the fault is confirmed. See our brands for the full list of eight manufacturers we service.
Pricing for Gate Repair in Pearland, TX
| Service | Typical range in Pearland |
|---|---|
| Hinge replacement | $185-$425 per hinge |
| Post re-setting or replacement | $425-$1,200 |
| Rail repair or re-welding | $150-$600 |
| Keypad entry repair or replacement | $185-$425 |
| Remote programming or replacement | $95-$220 per remote |
| Phone entry or card reader repair | $225-$600 |
| Service call and on-site diagnosis | $75-$125, credited to any repair |
| Hourly welding or fabrication labor | $90-$150 per hour |
Prices in Pearland run higher than the Texas average when clay movement has compromised a post: re-setting a footing is always more labor than swapping a hinge. Humidity and flood history also push up cost when control boards and wiring need full replacement rather than repair. We hand you a written price before any work starts, and we don’t start until you approve it.
Neighborhoods We Serve in Pearland
We cover the whole city, including the large master-planned communities and older sections on the east side. Most neighborhoods are within a 30-45 minute dispatch window, and we schedule access control and welding work to avoid HOA gate restriction hours.
- Shadow Creek Ranch
- Silverlake
- Silvercreek
- Southwyck
- Pearland East
Service Area - Cities Near Pearland
We also serve homeowners just outside the Pearland city limits. If you’re in Manvel, TX, Fresno, TX, Bellaire, TX, or Missouri City, TX, we can schedule the same written-price-and-documentation service we provide in Pearland.
Serving Pearland, TX - Our Local Coverage Area
We’re based in the Pearland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pearland
Most Pearland calls are handled same-day or next-day. A live person answers our phone around the clock, so if a gate has failed and the property is open, call (346) 295-3437 and we’ll get a technician scheduled from our Houston dispatch office.
Often yes. HOA-governed subdivisions like Shadow Creek Ranch and Silverlake have architectural guidelines for gate finish, hardware style, and color. We provide a written scope and photos the board can approve, and we can wait for committee sign-off before starting.
What documentation do I get after a Pearland gate repair?
You get a photo log of what we found, what we adjusted, and what we installed, plus a written record of part numbers and settings. That record lives in the job file so any future technician can see exactly what was done without re-diagnosing the gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pearland Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.